GENERAL | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
32-bit Application | |||||
Lathe Module | |||||
64-bit Application | |||||
Mill 4 Axis Pro Module | |||||
Mill 5 Axis Standard Module | |||||
Mill 5 Axis Pro Module | |||||
BobART Module | |||||
Mill Turn Module | |||||
Network Licensing | |||||
Mill 3 Axis Premium Module | |||||
On-Line License Registration | |||||
Part & Assembly Programming |
Mill | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
Mill Machining Wizards | |||||
Advanced Pocketing with Adaptive Roughing | |||||
3 Axis Adaptive Roughing | |||||
Multi-Pass Pencil Milling | |||||
Facing Cycle Enhancements | |||||
Toolpath Patterning | |||||
Rotary Toolpath | |||||
3+2 Positioning / Indexing | |||||
5 Axis Trimming | |||||
Surface Based Toolpaths | |||||
Multiaxis Roughing | |||||
SWARF Machining | |||||
New Tool Types Supported: Tapered Endmill, T-Cutter, Dove Mill, Lollipop | |||||
Machine Definitions and Full Machine Simultion | |||||
Multiple Depths for 3D Engrave Roughing | |||||
Multiple Threads per Feature & Thread Start Angle | |||||
Create Multiple Toolpath Patterns | |||||
Chain Start Point at the Feature Level and Operation Level | |||||
Boundaries at the Feature Level and Operation Level | |||||
More Tool Types for Profile Operations | |||||
Corner Round Tool and Operations | |||||
Rest Machining with Advanced Pocket | |||||
Lead Enhancements for 2 Axis Machining | |||||
New Advanced Planar Toolpath | |||||
New Advanced Z Level Finish Toolpath | |||||
New Project Curves Toolpath | |||||
Enhancements to Equidistant Toolpath | |||||
New Options for Advanced Rough Toolpath - Parallel Cut Pattern, Intermediate Slices Control, Trim to Stock, Smooth Links Gap Size | |||||
4 Axis Wrapping Enhancements | |||||
Enhanced SWARF Feature | |||||
Multiaxis Roughing Enhancements | |||||
Gouge Checking Enhancements | |||||
New Tool Axis Control | |||||
Enhancements to Clearances and Leads | |||||
Drill Multiple Depths in a Single Feature | |||||
Advanced Retract Options | |||||
Standard, Multiaxis, and Cross Drilling | |||||
Hole Geometry Selection Manager | |||||
Smart Filtering of Geometry Selections | |||||
Use Hole Feature Recognition to Automatically Set Drilling Parameters | |||||
Custom Tool Shapes for Milling Tools | |||||
Tabbing for 2 Axis Profiling | |||||
Linking Added to 2 Axis Advanced Pocket | |||||
Perpendicular Stepover for Advanced Planar | |||||
Round Corners for Advanced Planar | |||||
Improved Adaptive Toolpath | |||||
Enhanced Z Level Finish Operation | |||||
Separate Side and Bottom Allowance for 3 Axis Toolpaths | |||||
Revolve Stock Type | |||||
New Flowline Toolpath | |||||
New Mirror Option for Multiaxis Toolpaths | |||||
Optimized Multiaxis Posting Settings | |||||
Support for 4 Axis Machines with Rotary Along Z | |||||
Wrapped Toolpath Improvements | |||||
Trim to Stock for 4 Axis Rotary | |||||
Gouge Checking - Retract Along Tool Plane | |||||
Retract to Incremental Clearance Area | |||||
Maximum Angle Step for Rotation Axis | |||||
Minimize Tool Retracts | |||||
Toolpath Pattern - Points | |||||
Machine Sequence for Standard Drilling Operations | |||||
Tapered Thread Milling Capabilities | |||||
Thread Mill Side Roughing | |||||
Machine Compensation Support for Thread Milling | |||||
New Thread Mill Tool Types | |||||
Spiral Pocketing for Circles | |||||
Helical Arc Output for Spiral Entities | |||||
Advanced Pocket Calculation Improvements | |||||
Improved Open Shape Detection | |||||
Gouge Checking for Mill 3 Axis Pro Toolpaths | |||||
Rest Finishing from STL Stock Model | |||||
Improvements to the Angle Range Calculations | |||||
Improved Calculation Speed and Toolpath Quality for Advanced Rough | |||||
Parallel Cutting - Profile After for Advanced Rough | |||||
Stock Thickness Detection for Rest Machining Added to Advanced Rough | |||||
Tool Outside, Inside, Center and Offset Boundards for Advanced Rough | |||||
Parallel and Adaptive Patterns for Flatlands | |||||
Round Corners for Advanced Planar | |||||
Step Down for Advanced Planar | |||||
Full Contour Pass Options for Advanced Z Level Finish | |||||
New Mill 3 Axis Premium Module | |||||
Machine Sequence for Cross, or Multiaxis Drilling Operations | |||||
Extend Edge Curve | |||||
Exact Stepover Option | |||||
Common Direction Tilting Options | |||||
User Controlled Point Distribution | |||||
Maintain Tilt | |||||
Fixture Selection | |||||
Drag Knife | |||||
Adaptive Face Feature & Stock Boundary Recognition | |||||
Machine Sequence Sorting Patterns (Extrnal & Internal) | |||||
Multi-Step Chamfer Milling | |||||
Peck Plunge Lead In | |||||
Extend & Trim Profiles | |||||
Toolpath Editor | |||||
Parallel Pocket Pattern | |||||
Offset In /Out Pocket Pattern | |||||
Morph Spiral Pocket Pattern | |||||
Adaptive Roughing with Breakthough Adjustment | |||||
Dynamic Holder Collision Avoidance | |||||
Vertical Arc Lead In | |||||
Advanced Z-Level Finish Start Point Control | |||||
Advanced Z Level Finish Undercutting | |||||
Round Corner/Smooth Corner Calculation | |||||
Expand Rest Machining Area | |||||
Multisple Surface Selection for Flowline | |||||
Lead In - Reverse Orthogonal Line | |||||
Automatic Arc Lead | |||||
Rotary Adaptive Stepover | |||||
4 Axis Roughing & Finishing | |||||
Rapid Distance in Tool Plane | |||||
Tool Axis Smoothing | |||||
Contact Point Feed Rate Optimization | |||||
Swarf Normal to Guide Curve | |||||
Swarf Sort From Bottom | |||||
Multiaxis Roughing Dynamic Holder Collision Checking | |||||
Extend Cuts from Stock | |||||
Gradual Front Shift Change | |||||
Rotational/Peridoic Pocketing Geometry | |||||
Gradual Side Tilt Angle Change for Fixed Angle to Axis | |||||
Blended Spline Linking Clearance | |||||
Automatic Arc Lead | |||||
Automatic Start Height for Position Line Lead-in | |||||
Automatic Clearance Area |
CAM | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
Multiple Setups | |||||
Multi-Threaded 3 Axis Pro Toolpath Calculations | |||||
Stock Wizard | |||||
Wrapping Groups | |||||
Tool Crib | |||||
Material/Cutting Conditions | |||||
Tool Holder Library | |||||
Full Machine Simulation | |||||
Support for Multiple Machining Jobs in One File | |||||
Copy & Paste Features & Operations | |||||
Dynamic Machining Strategies in the CAM Wizards | |||||
Geometry Based Machining | |||||
Apply to All Operations / Apply to All Features | |||||
Dynamic Posting Order | |||||
Job Setup Sheets | |||||
Improved Tool Pattern | |||||
Collission & Proximity Alert in Simulation | |||||
Workpiece Selection for Simulation | |||||
Set Default Stock Transparency | |||||
New Simulation Interface with Ribbon Bar | |||||
Backplot | < | ||||
Update All Geometry (CAM Tree) | |||||
Groups (CAM Tree) | |||||
Smart View (Rotation Cube) in Simulation | |||||
Automatic Quality Improvements During Simulation | |||||
Measure Between Components in Simulation | |||||
Video Capture in Simulation | |||||
Part Image Added to the Setup Sheets | |||||
Advanced Feedrate Control | |||||
Edit Operation | |||||
Toolpath Start/End Indicators | |||||
Lock/Unlock Operations | |||||
NC Editor | |||||
Toolpath Statistics | |||||
Multiple/Split Window Simulation | |||||
Double Click for move list location | |||||
Toolpath Section Plane | |||||
ABC Axis Value Change | |||||
Operation Highlight | |||||
Thicken Operation | |||||
Move list based on operation color | |||||
Jump to First / Last Move | |||||
Ruler | |||||
Measure Grid | |||||
Zoom Window | |||||
Show Previous View | |||||
Full Screen Mode | |||||
Automatic Coloring Mode for Tool Axis Vectors | |||||
Machine Configuration display arrows for direction | |||||
Highlight Object in Simulation | |||||
Highligting for Collision Checking Groups | |||||
Machine Simulation Move List Improvements | |||||
Axis Control Input Value | |||||
Improved Pop Up Notifications | |||||
Simulation view roation point marked | |||||
Automatic Chip Removal Based on Volume | |||||
Transorm Plane Output (Fanuc G68.2 or equivalent) | |||||
Origin Tracking (HAAS DWO) | |||||
Degree Per Minute Output | |||||
New Post Variables |
Lathe | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
Lathe Jobs | |||||
Cut Profiles Detected from the Solid Model | |||||
New Methods for Determining Maximum Profile for Non-Cylindrical Models | |||||
Option to Remove Undercutting and Grooves from Geometry Selection for Roughing and Finishing | |||||
Machining Features for Roughing, Finishing, Grooving, Drilling, Cut off, and Stock Feed | |||||
Tapping Feature | |||||
Lathe System Compensation Without Collission Detection | |||||
Lathe Wizards | |||||
Improved Lathe Feature Creation | |||||
Lathe Stock Wizard | |||||
Lathe Drilling Matches Mill | |||||
Improved Lathe Profile Detection | |||||
Completely Enhanced Lathe System | |||||
Spun Profile for Lathe Features | |||||
Stock Tracking | |||||
Trim to Stock | |||||
New Lathe Tool and Holder Definitions | |||||
Feature Type and Regions | |||||
Constraints | |||||
Extension | |||||
Automatic Removal of Undercuts | |||||
Rapid Plane | |||||
New Feature Types (End Face and Groove) | |||||
Rough Turning Operation Enhancements (Various Pattern Types, Sorting, Overlap, Rough Allowance) | |||||
Pattern Repeat Operation Enhancements ( Various Pattern Types, Sorting) | |||||
Basic Finish Operation Enhancements (Various Pattern Types) | |||||
Groove Roughing Operation Enhancements (Various Pattern Types, Sorting, Alignment, Rough Allowance, Multiple Depth Grooving, Processing) | |||||
Groove Finish Operation Enhancements (Force Down Cutting) | |||||
Corner Type | |||||
Rapid on Entry Options | |||||
New Lead Options |
Mill Turn | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
Mill Turn Jobs | |||||
Mill Turn Machine Definition and Submachines | |||||
Adapter Library | |||||
Mill Turn Tool Crib | |||||
Machine Simulation Pro | |||||
MDI | |||||
Fully Revamped Lathe System Utilized in Mill Turn | |||||
Chuck Jaw Wizard |
BobART | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
Load Vector Files | |||||
Image Vectorization | |||||
Emboss Models | |||||
Emboss Feature | |||||
Wrapped Emboss Models | |||||
Remove Non-Emboss Area | |||||
Save as Component/STL | |||||
Emboss from Component Feature | |||||
Suppress One or More Individual Features | |||||
Custom Cross Sections | |||||
Material/Texture Selection |
Languages | V3 | V4 | V5 | V6 | V7 |
---|---|---|---|---|---|
English | |||||
Spanish | |||||
Turkish | |||||
Japanese | |||||
Portuguese | |||||
Russian | |||||
German |