| GENERAL | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| 32-bit Application | |||||
| Lathe Module | |||||
| 64-bit Application | |||||
| Mill 4 Axis Pro Module | |||||
| Mill 5 Axis Standard Module | |||||
| Mill 5 Axis Pro Module | |||||
| BobART Module | |||||
| Mill Turn Module | |||||
| Network Licensing | |||||
| Mill 3 Axis Premium Module | |||||
| On-Line License Registration | |||||
| Part & Assembly Programming |
| Mill | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| Mill Machining Wizards | |||||
| Advanced Pocketing with Adaptive Roughing | |||||
| 3 Axis Adaptive Roughing | |||||
| Multi-Pass Pencil Milling | |||||
| Facing Cycle Enhancements | |||||
| Toolpath Patterning | |||||
| Rotary Toolpath | |||||
| 3+2 Positioning / Indexing | |||||
| 5 Axis Trimming | |||||
| Surface Based Toolpaths | |||||
| Multiaxis Roughing | |||||
| SWARF Machining | |||||
| New Tool Types Supported: Tapered Endmill, T-Cutter, Dove Mill, Lollipop | |||||
| Machine Definitions and Full Machine Simultion | |||||
| Multiple Depths for 3D Engrave Roughing | |||||
| Multiple Threads per Feature & Thread Start Angle | |||||
| Create Multiple Toolpath Patterns | |||||
| Chain Start Point at the Feature Level and Operation Level | |||||
| Boundaries at the Feature Level and Operation Level | |||||
| More Tool Types for Profile Operations | |||||
| Corner Round Tool and Operations | |||||
| Rest Machining with Advanced Pocket | |||||
| Lead Enhancements for 2 Axis Machining | |||||
| New Advanced Planar Toolpath | |||||
| New Advanced Z Level Finish Toolpath | |||||
| New Project Curves Toolpath | |||||
| Enhancements to Equidistant Toolpath | |||||
| New Options for Advanced Rough Toolpath - Parallel Cut Pattern, Intermediate Slices Control, Trim to Stock, Smooth Links Gap Size | |||||
| 4 Axis Wrapping Enhancements | |||||
| Enhanced SWARF Feature | |||||
| Multiaxis Roughing Enhancements | |||||
| Gouge Checking Enhancements | |||||
| New Tool Axis Control | |||||
| Enhancements to Clearances and Leads | |||||
| Drill Multiple Depths in a Single Feature | |||||
| Advanced Retract Options | |||||
| Standard, Multiaxis, and Cross Drilling | |||||
| Hole Geometry Selection Manager | |||||
| Smart Filtering of Geometry Selections | |||||
| Use Hole Feature Recognition to Automatically Set Drilling Parameters | |||||
| Custom Tool Shapes for Milling Tools | |||||
| Tabbing for 2 Axis Profiling | |||||
| Linking Added to 2 Axis Advanced Pocket | |||||
| Perpendicular Stepover for Advanced Planar | |||||
| Round Corners for Advanced Planar | |||||
| Improved Adaptive Toolpath | |||||
| Enhanced Z Level Finish Operation | |||||
| Separate Side and Bottom Allowance for 3 Axis Toolpaths | |||||
| Revolve Stock Type | |||||
| New Flowline Toolpath | |||||
| New Mirror Option for Multiaxis Toolpaths | |||||
| Optimized Multiaxis Posting Settings | |||||
| Support for 4 Axis Machines with Rotary Along Z | |||||
| Wrapped Toolpath Improvements | |||||
| Trim to Stock for 4 Axis Rotary | |||||
| Gouge Checking - Retract Along Tool Plane | |||||
| Retract to Incremental Clearance Area | |||||
| Maximum Angle Step for Rotation Axis | |||||
| Minimize Tool Retracts | |||||
| Toolpath Pattern - Points | |||||
| Machine Sequence for Standard Drilling Operations | |||||
| Tapered Thread Milling Capabilities | |||||
| Thread Mill Side Roughing | |||||
| Machine Compensation Support for Thread Milling | |||||
| New Thread Mill Tool Types | |||||
| Spiral Pocketing for Circles | |||||
| Helical Arc Output for Spiral Entities | |||||
| Advanced Pocket Calculation Improvements | |||||
| Improved Open Shape Detection | |||||
| Gouge Checking for Mill 3 Axis Pro Toolpaths | |||||
| Rest Finishing from STL Stock Model | |||||
| Improvements to the Angle Range Calculations | |||||
| Improved Calculation Speed and Toolpath Quality for Advanced Rough | |||||
| Parallel Cutting - Profile After for Advanced Rough | |||||
| Stock Thickness Detection for Rest Machining Added to Advanced Rough | |||||
| Tool Outside, Inside, Center and Offset Boundards for Advanced Rough | |||||
| Parallel and Adaptive Patterns for Flatlands | |||||
| Round Corners for Advanced Planar | |||||
| Step Down for Advanced Planar | |||||
| Full Contour Pass Options for Advanced Z Level Finish | |||||
| New Mill 3 Axis Premium Module | |||||
| Machine Sequence for Cross, or Multiaxis Drilling Operations | |||||
| Extend Edge Curve | |||||
| Exact Stepover Option | |||||
| Common Direction Tilting Options | |||||
| User Controlled Point Distribution | |||||
| Maintain Tilt | |||||
| Fixture Selection | |||||
| Drag Knife | |||||
| Adaptive Face Feature & Stock Boundary Recognition | |||||
| Machine Sequence Sorting Patterns (Extrnal & Internal) | |||||
| Multi-Step Chamfer Milling | |||||
| Peck Plunge Lead In | |||||
| Extend & Trim Profiles | |||||
| Toolpath Editor | |||||
| Parallel Pocket Pattern | |||||
| Offset In /Out Pocket Pattern | |||||
| Morph Spiral Pocket Pattern | |||||
| Adaptive Roughing with Breakthough Adjustment | |||||
| Dynamic Holder Collision Avoidance | |||||
| Vertical Arc Lead In | |||||
| Advanced Z-Level Finish Start Point Control | |||||
| Advanced Z Level Finish Undercutting | |||||
| Round Corner/Smooth Corner Calculation | |||||
| Expand Rest Machining Area | |||||
| Multisple Surface Selection for Flowline | |||||
| Lead In - Reverse Orthogonal Line | |||||
| Automatic Arc Lead | |||||
| Rotary Adaptive Stepover | |||||
| 4 Axis Roughing & Finishing | |||||
| Rapid Distance in Tool Plane | |||||
| Tool Axis Smoothing | |||||
| Contact Point Feed Rate Optimization | |||||
| Swarf Normal to Guide Curve | |||||
| Swarf Sort From Bottom | |||||
| Multiaxis Roughing Dynamic Holder Collision Checking | |||||
| Extend Cuts from Stock | |||||
| Gradual Front Shift Change | |||||
| Rotational/Peridoic Pocketing Geometry | |||||
| Gradual Side Tilt Angle Change for Fixed Angle to Axis | |||||
| Blended Spline Linking Clearance | |||||
| Automatic Arc Lead | |||||
| Automatic Start Height for Position Line Lead-in | |||||
| Automatic Clearance Area |
| CAM | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| Multiple Setups | |||||
| Multi-Threaded 3 Axis Pro Toolpath Calculations | |||||
| Stock Wizard | |||||
| Wrapping Groups | |||||
| Tool Crib | |||||
| Material/Cutting Conditions | |||||
| Tool Holder Library | |||||
| Full Machine Simulation | |||||
| Support for Multiple Machining Jobs in One File | |||||
| Copy & Paste Features & Operations | |||||
| Dynamic Machining Strategies in the CAM Wizards | |||||
| Geometry Based Machining | |||||
| Apply to All Operations / Apply to All Features | |||||
| Dynamic Posting Order | |||||
| Job Setup Sheets | |||||
| Improved Tool Pattern | |||||
| Collission & Proximity Alert in Simulation | |||||
| Workpiece Selection for Simulation | |||||
| Set Default Stock Transparency | |||||
| New Simulation Interface with Ribbon Bar | |||||
| Backplot | < | ||||
| Update All Geometry (CAM Tree) | |||||
| Groups (CAM Tree) | |||||
| Smart View (Rotation Cube) in Simulation | |||||
| Automatic Quality Improvements During Simulation | |||||
| Measure Between Components in Simulation | |||||
| Video Capture in Simulation | |||||
| Part Image Added to the Setup Sheets | |||||
| Advanced Feedrate Control | |||||
| Edit Operation | |||||
| Toolpath Start/End Indicators | |||||
| Lock/Unlock Operations | |||||
| NC Editor | |||||
| Toolpath Statistics | |||||
| Multiple/Split Window Simulation | |||||
| Double Click for move list location | |||||
| Toolpath Section Plane | |||||
| ABC Axis Value Change | |||||
| Operation Highlight | |||||
| Thicken Operation | |||||
| Move list based on operation color | |||||
| Jump to First / Last Move | |||||
| Ruler | |||||
| Measure Grid | |||||
| Zoom Window | |||||
| Show Previous View | |||||
| Full Screen Mode | |||||
| Automatic Coloring Mode for Tool Axis Vectors | |||||
| Machine Configuration display arrows for direction | |||||
| Highlight Object in Simulation | |||||
| Highligting for Collision Checking Groups | |||||
| Machine Simulation Move List Improvements | |||||
| Axis Control Input Value | |||||
| Improved Pop Up Notifications | |||||
| Simulation view roation point marked | |||||
| Automatic Chip Removal Based on Volume | |||||
| Transorm Plane Output (Fanuc G68.2 or equivalent) | |||||
| Origin Tracking (HAAS DWO) | |||||
| Degree Per Minute Output | |||||
| New Post Variables |
| Lathe | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| Lathe Jobs | |||||
| Cut Profiles Detected from the Solid Model | |||||
| New Methods for Determining Maximum Profile for Non-Cylindrical Models | |||||
| Option to Remove Undercutting and Grooves from Geometry Selection for Roughing and Finishing | |||||
| Machining Features for Roughing, Finishing, Grooving, Drilling, Cut off, and Stock Feed | |||||
| Tapping Feature | |||||
| Lathe System Compensation Without Collission Detection | |||||
| Lathe Wizards | |||||
| Improved Lathe Feature Creation | |||||
| Lathe Stock Wizard | |||||
| Lathe Drilling Matches Mill | |||||
| Improved Lathe Profile Detection | |||||
| Completely Enhanced Lathe System | |||||
| Spun Profile for Lathe Features | |||||
| Stock Tracking | |||||
| Trim to Stock | |||||
| New Lathe Tool and Holder Definitions | |||||
| Feature Type and Regions | |||||
| Constraints | |||||
| Extension | |||||
| Automatic Removal of Undercuts | |||||
| Rapid Plane | |||||
| New Feature Types (End Face and Groove) | |||||
| Rough Turning Operation Enhancements (Various Pattern Types, Sorting, Overlap, Rough Allowance) | |||||
| Pattern Repeat Operation Enhancements ( Various Pattern Types, Sorting) | |||||
| Basic Finish Operation Enhancements (Various Pattern Types) | |||||
| Groove Roughing Operation Enhancements (Various Pattern Types, Sorting, Alignment, Rough Allowance, Multiple Depth Grooving, Processing) | |||||
| Groove Finish Operation Enhancements (Force Down Cutting) | |||||
| Corner Type | |||||
| Rapid on Entry Options | |||||
| New Lead Options |
| Mill Turn | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| Mill Turn Jobs | |||||
| Mill Turn Machine Definition and Submachines | |||||
| Adapter Library | |||||
| Mill Turn Tool Crib | |||||
| Machine Simulation Pro | |||||
| MDI | |||||
| Fully Revamped Lathe System Utilized in Mill Turn | |||||
| Chuck Jaw Wizard |
| BobART | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| Load Vector Files | |||||
| Image Vectorization | |||||
| Emboss Models | |||||
| Emboss Feature | |||||
| Wrapped Emboss Models | |||||
| Remove Non-Emboss Area | |||||
| Save as Component/STL | |||||
| Emboss from Component Feature | |||||
| Suppress One or More Individual Features | |||||
| Custom Cross Sections | |||||
| Material/Texture Selection |
| Languages | V3 | V4 | V5 | V6 | V7 |
|---|---|---|---|---|---|
| English | |||||
| Spanish | |||||
| Turkish | |||||
| Japanese | |||||
| Portuguese | |||||
| Russian | |||||
| German |
